This page allows you to flash Silicon Labs EFR32MG21 based Zigbee dongles directly from your Chrome-based browser.

Supported devices:

  • Sonoff ZBDongle-E
  • Easyiot ZB-GW04
  • SMLIGHT SLZB-07
  • SMLIGHT SLZB-06M

It will install the most recent recommended builds from darkxst/silabs-firmware-builder. If you want the very latest builds, you can use Custom URL option.

Start by clicking Connect for your device below.

You can select from these firmware:

  • EZSP - Standard Zigbee (NCP) firmware - Baudrate 115200
  • MultiPAN RCP - Zigbee + Thread for Silabs Multiprotocol Addon - Baudrate 460800 (230400 for ZB-GW04)
  • Openthread RCP - Thread Only - Baudrate 460800 (230400 for ZB-GW04)
  • Upload Custom - Provide a custom .gbl firmware file

NOTE: Make sure to close anything using your devices serial port (e.g. ZHA, Zigbee2MQTT, Silabs Multiprotocol Add-on)

ZBDongle-E

Sonoff Zigbee 3.0 USB Dongle Plus V2 - No hardware flow control

NOTE: The latest CP210X Windows driver has known compatibility issues. For the new batch of ZBDongle-E (SN: 30623XXXXX and above on the back) with CP2102 serial chip, please install the older version 6.7.0.0 driver: CP210x VCP Windows.

ZBDongle-E

Connect


ZB-GW04 (v1.2)

Easyiot ZB-GW04 Revision v1.2 - Hardware flow control
ZB-GW04

Connect


ZB-GW04 (v1.1)

Easyiot ZB-GW04 Revision v1.1 - No flow control
ZB-GW04

Connect


SMLIGHT SLZB-07

SMLIGHT SLZB-07 - Hardware flow control
SMLIGHT SLZB-07

Connect


SMLIGHT SLZB-06M

  • SMLIGHT SLZB-06M - No hardware flow control
  • Zigbee and multiPAN RCP (Zigbee+Thread/Matter) work Ethernet, Wi-Fi and USB modes, Thread RCP works in USB mode only (current limitations of HA add-ons).
    SMLIGHT SLZB-06M

Manual: How to Flash the SLZB-06M via darkxst’s silabs web-flasher/firmware-builder.

Connect